Sign inStart free trial
All help articlesScheduling & dispatch

Autopilot

How Autopilot plans tomorrow tonight and today from the Schedule board, what it changes on its own, what it asks you first, and what you can control.

Autopilot plans your day so you don't have to drag every visit onto the board. In the recommended Safe mode it makes the changes that keep your promise to the customer: it assigns and swaps technicians, and it moves a visit only within 15 minutes or inside the arrival window the customer was given. It asks before moving a visit outside that window, and it never moves a visit your office pinned.

The Autopilot drawer

Autopilot lives on the Schedule board. Click Autopilot at the top of the board to open or close its drawer. The button's number counts the changes waiting for you. On the Day view of a wide screen the drawer stays open beside the board. Otherwise it opens over the board. While it's open, To schedule is hidden; opening To schedule closes it.

  • The line under the title sums up the plan, for example 3 changes ready · books 2 waiting jobs.
  • Each change says what it does (Book a waiting job or Move a visit), when and with which tech, and why. Emergencies and urgent jobs are marked.
  • Autopilot settings opens Settings → Automation → Autopilot, if you can change it.
  • With nothing to review, the drawer says Nothing left to review. Run now asks Autopilot for a fresh plan for today. It also checks when a new job comes in.

What it changes on its own

Choose the mode under Settings → Automation → Autopilot. Only owners and admins can change it.

  • Off: Autopilot only suggests. When someone opens the board and there is work to fix, it proposes a plan. A newly booked visit with no tech also gets a proposal. Nothing moves until someone approves it.

  • Safe (recommended): Autopilot plans on its own at the times you set (see The daily rhythm). It also replans when a visit runs late or overruns, is cancelled or finishes early, when an emergency comes in, and when a visit is booked. In those runs it applies these changes itself:

    • assigning or swapping the technician;
    • moving a visit by 15 minutes or less;
    • moving a visit to a new start inside the arrival window stored on the visit. A visit booked for an exact time can't move this way.

    A new time outside the stored window waits for approval. When it books a newly added visit, Autopilot only assigns the technician and leaves the time alone.

  • Full: in those same runs it applies every change, except a move of a visit your office pinned.

In Safe and Full, when an applied change moves a customer's time by more than 15 minutes, Autopilot sends the customer the message it drafted, by text or email, the same way other customer messages go. If no draft is left, it sends the standard reschedule message. A change of technician alone sends nothing.

A plan you ask for with Run now is always a proposal, whatever the mode. When Autopilot applies changes or proposes a plan, the office gets a notification summing up what changed. Each change is listed on the plan itself. If a moved customer couldn't be messaged, the notification names them so you can call.

The daily rhythm

In Safe and Full, Autopilot plans tomorrow the evening before, then checks today again in the morning. Set it up under Daily rhythm on the Autopilot settings page:

  • Plan tomorrow at: between 12 PM and 4 PM (4 PM unless you change it), so the plan is in place before the 5 PM day-before reminders go out. It plans your next business day.
  • Re-check today at: the morning run. When tomorrow was planned the evening before, the morning run fixes only what changed since then: new bookings, cancellations, time off and visits with no tech.
  • Lock each tech’s first stop: on by default. Once tomorrow's plan is in place, each tech's first visit shows Locked by Autopilot, and later runs keep it where it is.
  • Don’t move a visit within: once a visit with a tech is this close to starting, Autopilot leaves it alone. The default is 1 hour. When a tech is running behind, their later visits that day can still be moved.

When tomorrow is planned, each technician with visits that day gets one notification in the mobile app, such as "Tomorrow: 5 visits, first at 8:00 AM — 123 Main St", instead of one per visit.

How it decides

Autopilot looks at the visits dated for the day, including ones nobody is assigned to yet. Some rules are always enforced: skills (including trade, when your techs have trade tags), certifications, the customer's arrival window, time off and frozen technicians. Then it weighs how close each visit is to its deadline, drive time, and how much the plan would change from what's already booked.

You can adjust those weights under Scoring weights on the Autopilot settings page. Send your best closers to high-value calls is off (0) by default. Turn it up to send the techs whose quotes get approved most often to the visits worth the most.

A visit's arrival window is the one you set on it. If you didn't set one, the visit may start up to your default arrival window after its booked time. That's 2 hours unless you change it under Settings → Scheduling → Arrival window. If that setting is exact times, the visit keeps its booked start.

Pinned visits

Open a visit on the board and choose Pin visit or Unpin visit. A visit you move or reschedule by hand is pinned for you. Autopilot never moves a visit your office pinned on its own. It can only propose a move for one, for example when its tech is off, and a person has to approve it.

Visits Autopilot locked show Locked by Autopilot. A lock gives way when its visit is late to start or its tech is running behind, so Autopilot can replan around it. When someone moves a locked visit, it becomes an ordinary pin.

Review and approve

  1. A plan waiting for your OK shows in the Autopilot drawer.
  2. Click Approve or Skip on each change. A skipped booking stays in To schedule, and a skipped move stays where it was.
  3. Approve all applies every change at once, and Skip all turns the whole plan down.
  4. Text customers starts on. It sends the messages Autopilot drafted for customers whose visits move. Turn it off to approve without messaging anyone.

A proposed plan stays live until something it depends on changes (its own visits, or the techs and crews it moves) or its day ends. Then it's marked superseded or expired, and Autopilot looks at the day again. Changes to other techs' days don't affect it. When Autopilot replans over a plan it made on its own, any changes in that plan still waiting for you carry over into the new one.

History

Every plan, what changed and why, is under Insights → Reports. In the Autopilot band, click Open Autopilot history to see the list. You can filter it by Proposed, Applied or Rejected and open any plan.

Visits it couldn't place

If Autopilot can't place a visit, the plan says Couldn't place with the reason: No fitting tech or No open window. Resolve it by changing the visit's window or requirements, or by scheduling it yourself.

Undo a booking Opero made

When Opero booked a request on its own, the request in Triage says Booked by the agent before anyone looked. If the visit hasn't started, click Undo booking. The job and its visit are cancelled, and the request goes back in the Triage queue. The box that tells the customer, named for them (such as Tell Sam the visit is cancelled), starts on and sends them that message.

You can't undo it here once work has started, or if the job has another visit, a quote or an invoice. Change it from the job instead.

Time off and frozen techs

On the Schedule board, the menu on a technician's lane has Mark time off, so dispatchers can record it too. The Day view shades time off as Off and hours outside the tech's working hours as Off shift. The Week view marks days a tech is off. You can still drop a visit onto that time: the board warns you and the move goes ahead.

Under Settings → People → Technicians, the menu on a technician's row has:

  • Time off: from, to and a reason. Autopilot treats the tech as unavailable for that time. If visits already fall inside the time you add, a banner lists them; click Replan affected visits and Autopilot moves them, then review the result in Schedule.
  • Freeze in Autopilot: opens Frozen technicians on the Autopilot settings page. Turn on the tech’s Frozen switch, say why and until when, and save. Autopilot then leaves that tech's day as it is: their visits stay put, and it won't move work to or from them. Unfreeze in Autopilot takes you to the same place to hand them back.
Was this helpful?